Your security and that of your property, both at home and at the workplace, depends largely on the locks that you use on the gate. There are many types of locks that can be used to ensure that security is bolstered. They, however, are each meant for specific purposes and therefore, you need to understand the ones that suit you best before you install them. The good thing is that regardless of where you come from, you always will find a lock that suits your gate. The following are some of the many lock options for your gate.
Resources:
www.avondalelocksmith.org
homedepot.com
hardwaresource.com
Thumb locks
A thumb locking system is more suitable for swinging gates owing to its design. It consists of a double sided lock that has a decorative plate on the side that faces the outside. By pressing the thumb on the plate, a latch arm which is on the inside is lifted and therefore, it allows the gate to open. When you want to close the gate, you only need to make the latch-arm to hit the strike, lift up and then fall in place. This almost happens on its own once the gate comes into the closing position. This is one of the easiest locking systems to install and use.
Ring locks
Another one of the lock options for your gate is to choose ring locks. It is operable from sides and can be used on both out-swinging and in-swinging gates. One of the most notable features is that there is a back-plate with a ring on it which is placed on the outside of the gate. There also is a similar plate and ring on the inside. To open the gate, all that you need to do is to lift the ring on either side of the gate in order to lift the arm out of the catch. Some options that you are likely to find when buying these locks include spring-loaded and gravity assisted types. When installing them, you need to remember that that the side that has the arm should be on the inside of the gate.
Lever locks
Lever locks are quite similar to the two mentioned above save for the fact that they have a lever handle. They are some of the locks that can be installed on any type of gate regardless to the side where it swings. To open the gate, you need to twist the lever in the right direction so as to lift the arm. Releasing the lever will take the arm back to its position and that is how you lock the gate.
As you can see, there are lots of lock options for your gate. Your choice should be determined by a number of factors including your gate type, the level of security that you want and what is most convenient for you. If you are thinking about the prices of these locks, they vary depending on the specific item that you buy. You, however, should insist on high quality rather than thinking about the amount that you will spend.